FormQueryPlugin

The FormQueryPlugin provides a query interface to the TWiki::Contrib::DBCache? module, giving a way to present query results as formatted tables.

When using the plugin each topic is treated as a container for data fields. These fields can be the fields in the form attached to the topic, or can be parsed out of the topic. The database is managed by the TWiki::Contrib::DBCache? module, which must be installed for this plugin to work.

The tutorial section of this topic gives an introduction to formulating and formatting queries using this plugin, and is a good place to start.

Note: Since the last release the following macros have been deprecated. Please get compatible support by loading the appropriate plugins:

Macro Plugin
CALLMACRO TWiki:Plugins/MacrosPlugin
SET TWiki:Plugins/MacrosPlugin
ARITH Still supported in this release, but undocumented and should be replaced by %CALC% from SpreadSheetPlugin
PROGRESS Deprecated in favour of GaugePlugin?, though still supported because it doesn't require ay additional software to be installed (progress bars are pure HTML)
WORKDAYS Still supported in this release though undocumented and deprecated on the basis that it should be in %CALC% at some point
The tasknotify script has also been removed and is now shipped separately as the TWiki:Plugins/NotifierAddon.

If the appropriate plugins and contributed code modules are loaded, this release should be fully compatible with previous releases of this plugin.

Features

  • Perform complex queries on the database
  • Extensive conditional formatting support
  • Automatic derivation of new topic names
  • Recognition and special formatting of key data strings

How the database gets built

The basic database is built using the DBCache. Refer to the documentation of that module for details of how it works.

As well as the form data loaded by the DBCache, the FormQueryPlugin adds the ability to extract embedded tables from topics.

Embedded tables that follow a specific format (defined using the EditTablePlugin) are added to the topic as an array of rows, each of which contains a map keyed on the fields and mapping to the values in the table. This array is added to the topic as a field named the same as the table type. Where there are multiple tables of the same type in a topic, they are concatenated together into a single array. See Settings for more information about how to set up tables.

Topics can also be automatically related to each other by name. The plugin uses something called Topic Relations that allow the creation of two-way relationships between topics. Topic relations from parent topics to child topics are stored in the map of the parent topic using the name of the relation as the field name and an array of references to the maps of child topics. Reverse relations from child to parent topics are also stored. See Settings for more information about how to set up topic relations.

Most of the rest of this documentation describes how to search this database and generate reports.


Syntax Rules

Queries

%FORMQUERY

%FORMQUERY is the basic query mechanism. A %FORMQUERY works either on the whole database or, if the query parameter is given, the results of another query.
Parameter Description
name Required, gives the name of the query result for use in %SHOWQUERY or another %FORMQUERY
search Required, the search to perform (see Search operators)
query Optional, the name of the query to refine. If missing, defaults to the whole database
extract Optional, the name of a field in each of the matched maps to flatten out into the returned list.
moan Optional, if set to "off" will disable match failed message

For example,

%FORMQUERY{name=AQuery search="Owner='Main\.Fred'"}%
%FORMQUERY{name=BQuery query=AQuery search="Product='Boiled Egg'"}%
%FORMQUERY{name=CQuery query=BQuery search="" extract=CookingTimes}%
%FORMQUERY{name=DQuery query=CQuery search="Time < '4'"}%
will search for all topics with a form field Owner set to Main.Fred, then filter that down to those topics that have Product set to Boiled Egg. Then it will extract and flatten out the embedded table CookingTimes in each matched topic. By "flatten out" we mean that future queries on CQuery must refer to the fields of the CookingTimes table, not the fields of the topic, i.e. CQuery will be an array of all the rows in the embedded table. Finally it will filter down to those rows that have the column Time < 4 minutes.

Of course there is more than one way to skin a cat. A faster way to formulate the same query would be to say:

%FORMQUERY{name=AQuery search="Owner='Main\.Fred' AND Product='Boiled Egg'" extract=CookingTimes}%
%FORMQUERY{name=DQuery query=AQuery search="Time < '4'"}%

FORMQUERY is normally silent i.e. it generates no output unless there is an error, in which case an error description is inserted. This error message can be disabled using the moan parameter which makes FORMQUERY totally silent.

Search operators
The available search operators are described in the documentation for the DB Cache Plugin. Search operators work on the fields of each map, be it a topic or an embedded table row.

Fields can be simple field names or can be more complex, and may even contain embedded searches. See Fields below for more information.

At present there is no way to constrain a search on the contents of a contained table, such as an embedded table or forward relation. However there are usually ways around this; for example, a %FORMQUERY that uses extract to flatten all the sub-tables, and then use of the parent relation to complete the search. For example:

%FORMQUERY{name=AQuery search="Product='Boiled Egg'" extract=CookingTimes}%
%FORMQUERY{name=DQuery query=AQuery search="Time < '4' AND CookingTimes_of.Owner='Main\.Fred'"}%

Fields
Field references can be as simple as the name of a field, or may be more complex expressions that can even include embedded searches. The precise interpretation of the syntax depends on the type (Map or Array) of the object being referenced. Arrays * N where $n is a number will get the Nth entry in the array e.g. attachments.9 * [_N_] where $n is a number will also get the Nth entry in the array e.g. attachments[9] * X will return the sum of the subfield X of each entry e.g. TaskTable.Effort will sum the Effort column in a table called TaskTable. * [?search] will perform the given search over the entries in the array. Always returns an array result, even when there is only one result. For example: attachments[?name='pitcha.gif'] will return an array of all the entries that have their subfield name set to Sam. * [*X] will get a new array made from field X of each entry in this array. For example attachments[*size] will get an array of the sizes of each attachment. Maps * X will get the subfield named X. For example, Product will get the formfield named Product. * X.Y will get the subfield Y of the subfield named X. * [X] = will get the subfield named =X (so X[Y] and X.Y are synonymous). In all cases * # means "reset to root". So #.Y will return the subfield Y of the Map at the root of the query.

Reports

%TABLEFORMAT

%TABLEFORMAT is like the old Fortran 'format' statement, in that it provides a template for the display of values extracted from a query.
Parameter Description
name Required, gives the name of the format for use in %SHOWQUERY or another %FORMQUERY
format Required, gives the format of the body rows (or the format to subclass)
header Optional, gives the format of the header row
footer Optional, gives the string to use to terminate the table
sort Optional, defines the sort order
moan Optional, if set to "off" disables error output

The header, footer and format parameters are very similar in application to the parameters used in the standard %SEARCH TWiki command. For the uninitiated, the header is used to define the first row of the results table:

header="| *Topic* | *Summary* |"
header="<table><tr><th>Topic</th><th>Summary</th></tr> |"
footer="</table>"

The format parameter is overloaded so it can also be used to refer to a table format previously defined using %TABLEFORMAT. This allows you to derive new formats (e.g. with different sort orders) For example,

%TABLEFORMAT{ name=TBLFMT format="|$topic|" sort="Owner,Priority"}%
%TABLEFORMAT{ name=SUBFMT format=TBLFMT sort="Priority,Owner" }%
Any of the header, footer or sort parameters in the referenced table format can be overridden by giving new values in the %SHOWQUERY.

The footer is usually only used for tables generated directly in HTML, in which case it is usually set to footer="</table>"

footer="</table>"

The format is used to define the rows in the body of the table:

format="| $topic | $Summary |"

Any fields in the form in the topic can be output by putting a $ sign before the name of the field. The two special fields $topic and $form are available for outputting the name of the topic and the type of the form. You can also refer to fields in related topics using the syntax $field.field where $field is the name of the relation and field is a field in the related topic; for example, format="|$Child_of.topic|".

It is also possible to expand the contents of tables embedded in the topic, in two ways:

  • using the syntax $field[format=FORMAT] where $field is the table type, which is named the same as the table topic, and FORMAT is the name of a format previously defined using %TABLEFORMAT and suitable for expanding the sub-table.
  • using the syntax $field.subfield where subfield is a numeric field in the contents of the embedded table (i.e. it contains a number). In this case the result will be the sum of all subfield values over all the rows in the table.

sort is used to define the sort order, and is a list of field names (without $'s) separated by commas. You can reverse the sort order for a column by prepending '-' to the field name. For example,

sort="Owner,-Priority"

The default sort method is string comparison. If the field data is numeric, then you can put a '#' in front of the field name to force the sort to be numeric. For example,

sort="Owner,#Priority"

or

sort="Owner,-#Priority"

%TABLEFORMAT is silent i.e. it produces no output on the page unless there is an error, in which case a descriptive error message is output. This message can be disabled using the moan parameter.

%SHOWQUERY

Used to show the results of a query, %SHOWQUERY accepts all the same parameters as %TABLEFORMAT (except name), and also the following parameters:
Parameter Description
query Required, gives the name of the query to show
row_from Optional, first row to display
row_count Optional, number of rows to display
For example,
%SHOWQUERY{ query=AFORMQUERY format=ATBLFMT }%
Note: If you render your results in TWiki table format and limit the rows displayed using row_count (e.g. first 10 from 99 rows), and also use TablePlugin to allow sorting on the headers, then only the 10 displayed rows will be sorted by TablePlugin (and not the full 99 rows in the table).

Automatic topic naming

When using relations (as described above) it is useful to be able to automatically generate new topics using the relation to define the new topic name. This tag supports this. This section can safely be ignored unless you want to generate topics using names derived from relations.

%TOPICCREATOR

Used to create a new topic generator button using rules defined in topic relations.
Parameter Description
relation Required, name of the relation to use to derive the next topic name
text Required, text of the button
base Optional, name of base topic to apply relation to. Defaults to the current topic.
form Optional, type of the form to include with the new topic. The wikiname of the topic containing the form definition.
template Optional, the template topic to use

The base is used as the RHS of the relation and a new topic name is derived. This is best shown by an example. If we have the relation:

Dir%A_%B subdir Dir%A

and the base is Dir75, and topics Dir75_1 through Dir75_54 already exist, the generator will generate topic Dir75_55. Note that even if there are gaps in the sequence e.g. Dir75_53 doesn't exist, the generator will still create Dir75_55 i.e. one more than the largest existing topic. The behaviour of the generator is undefined if the base does not match the RHS of the relation.

A special hard-coded relation, copy, is also provided by default that will create a new topic by incrementing a number at the end of the current topic name. For example, if the base is Dir75 and we say

%TOPICCREATOR{relation=copy}%
then the next topic created will be Dir76 (or whatever the next available topic is). If the current topic does not end in a number, it's behaviour is undefined.

The topic generator works by creating the topic name at the time the button is pressed i.e. you can dislay a topic containing a generator, wait a day, hit the button to create the new topic and the name of the new topic created will not conflict with other topics created by other people using the generator in the interim. To do this it uses the autocreate script installed in the twiki bin directory.

Other helpful macros

This section describes a number of other helpful macros provided by the plugin. It can safely be ignored unless you specifically want to use any of the functionality described here.

%PROGRESS - DEPRECATED, use TWiki:Plugins/GaugePlugin instead

Used to display a three-part progress bar.
Parameter Description
total Required, total length of the bar in arbitrary units
actual Required, where we really are
target Optional, where we should expect to be

If target is omitted, then it creates a standard two-part progress bar. If all three parameters are used, then it creates bars like this:

If actual < target, e.g. %PROGRESS{total=10 target=5 actual=3}%
 2  
If actual > target, e.g. %PROGRESS{total=10 target=5 actual=7}%
  2 

Tutorial

Imagine this scenario; we have a web of topics, each of which may contain a form of type MyForm and may contain a table of attachments.

The first thing we want to do is produce a summary table of all attachments in the web with size > 1024.

The web is represented as a Map (a.k.a hash, or associative array) indexed by the topic name. Within this map each topic is itself represented by a Map, within which there is always a field named attachments. This field contains a reference to an Array of Maps, one for each attachment. Each attachment Map is indexed by the name of a parameter of the record describing the attachment viz. name, attr, comment, date, path, size, user, and version. Pictorially: * TopicOne? (Map) * attachments (Array) 1 (Map) * name=pitcha.gif * size=2048 1 (Map) * name=image.jpg * size=556 * TopicTwo? (Map) * attachments (Array) * TopicThree? etc. The first thing we want to do is extract a single table of all the attachments in all the topics.

%FORMQUERY{name=Allatts search="" extract="attachments"}%
An empty search matches all entries, so AttQuery will now be set to the result of this query i.e. a flat Array of all attachments. We can narrow this down to attachments with size > 1024:
%FORMQUERY{name=Bigatts query=Allatts search="size>'1024'"}%
Now we can generate a table of these using SHOWQUERY:
%SHOWQUERY{query=Bigatts header="|*Topic*|*Name*|*Size*|" format="|$_up.topic|$name|$size|"}%
Note that we have to refer to $_up.topic to get the name of the topic because each attachment entry contains a reference to the parent topic's Map ( _up ), but not the topic's name. See the schema in TWiki::Plugins/DBCacheContrib for a list of available fields in each table in the database.

To extract the total size of the big attachments we can:

%SUMFIELD{query=Bigatts field="size"}%
Now let's say we want to extract all topics whose form attachment is of type MyForm, and then list all the topics referenced in the Othertopic field of MyForm.
%FORMQUERY{name=formed search="form='MyForm'"}%
%SHOWQUERY{query=formed header="|*Topic*|" format="|$Othertopic|"}%
Actiually, this isn't quite enough. What we really want to do is list the


FormQueryPlugin Settings

One line description, shown in the TextFormattingRules? topic:
  • Set SHORTDESCRIPTION = Provides query capabilities across a database defined using forms and embedded tables in TWiki topics.
Set to 1 to enable internal consistency checks and other debug states.
  • Set DEBUG = 0
Set to 0 if you do not want to use the Storable module even if it is installed. The plugin is much faster if Storable is installed and enabled.
  • Set STORABLE = 1
The plugin can be enabled gloablly, or on a per-web basis. If it is to be enabled globally, then the setting * Set FQP_ENABLE = 1 must appear in this topic. Otherwise the plugin can be enabled on a per-web basis by putting the FQP_ENABLE setting into the WebPreferences topic for the web. The remaining settings are defined on a per-web basis. * FQTABLES * FQRELATIONS * HIGHLIGHTMAP

Topic Relations

Topic relations are defined by setting the FQRELATIONS variable in the WebPreferences topic of the web to be processed. This defines a semicolon-separated list of rules for deriving relationships between topics using common portions of names. This is best illustrated by an example. Let's say we set FQRELATIONS to be:
ReQ%Ax%B SubReq ReQ%A; TiT%An%B TestItem ReQ%A
This describes two rules, the first of which says "Any topic named "ReQ<something>x<something>" is a SubReq of another topic called "ReQ<something>". Single upper case characters with a preceding percent sign are used to define the <something>s. So, in this example, ReQ1456 has the SubReq relation to ReQ1456x7. The reverse relation is also inserted, but appending _of to the relation name, so ReQ1456x7 has the SubReq_of relation to ReQ1456.

Obviously a single topic may have many topics that have the same relation to it (i.e. they are one-to-many), so forward relations are stored as arrays in the maps that represent topics. Reverse relations are many_to_one so they are stored as a simple field in the other topic. Relations are stored as pointers to the maps of the other topic so they can't be printed as if they were simple names. Instead you have to use them to refer to fields within the other topic. For example, in a %SHOWQUERY showing ReQReQ1456x7 you can't refer simply to $SubReq_of to get ReQ1456 (the name of the related topic); you have to use $SubReq_of.topic instead.

The default value of FQRELATIONS is ReQ%Ax%B SubReq ReQ%A; TiT%An%B TestItem ReQ%A

Tables

Tables to be read into the database must be formatted to use the Edittable plugin using the 'include=' feature that defined the format of the tables in another topic. Tables to be read are defined by setting the FQTABLES variable in the WebPreferences topic of the web. This is a list of the names of the topics that EditTablePlugin uses to find it's table formats. Tables are read in as arrays of maps, with each map keyed on a field name generated by stripping all non-alphabetic characters from the column header. Note that the column header where the table is defined is used, not the column header in the EditTable include= topic.

Two special map entries are added to each table row, topic and the equivalent of the reverse relation described above, represented by the name of the table with "_of" appended. So if you load a table type "CookingTimes", each row will have topic set to the name of the topic it was loaded from and CookingTimes_of set to the map of that topic. This allows you to refer to the fields of the topic that contains a table even after the table has been extracted.

The default value of FQTABLES is TaskTable

Formatting field values

A feature of the plugin is that special words in the fields of %SHOWQUERY can be recognised and formatted to your preference.

For example, let's say you want to detect the words "No progress" in a table field and highlight it in bold red text. This is done through a special topic in the web that contains a set of mappings from perl regular expressions that match the words to be recognised and the special formatting. For example, the highlight map might contain the following:

   * /(No progress)/ = <font color=red><b>$1</b></font>
The /No progress/ defines the perl RE to be matched, and the HTML on the right of the equals defines what to replace it with. The $1 inserts whatever was matched by the RE. The RE must match the whole string in the table field, so the above map will NOT match "No progress with editing"; to match that, you'd have to write:
   * /(No progress)(.*)/ = <font color=red><b>$1</b></font>$2
Only the first RE in the map matched by the string is expanded. Note that spaces between the '=' and the first non-whitespace character of the RHS are ignored. If you want a space here use &nbsp;

The default name of the map topic is HighlightMap though you can change this by setting the variable FQHIGHLIGHTMAP in WebPreferences to the name of the topic to use instead. For example

   * Set FQHIGHLIGHTMAP = MyHighlightMap

Just about any formatting can be included on the LHS of the map; for example, you may want to leverage the SmiliesPlugin and translate "pass" to a smiley face and "fail" to a frown.

   * /pass/ = :-)
   * /fail/ = :-(


Plugin Installation Instructions

Note: These instructions are for the TWiki maintainer. No changes to your browser are required.
  • Download the ZIP file from the Plugin web (see below). Contents:
    File: Description:
    lib/TWiki/Plugins/FormQueryPlugin.pm Main plugin script
    lib/TWiki/Plugins/FormQueryPlugin/Arithmetic.pm Arithmetic interpreter
    lib/TWiki/Plugins/FormQueryPlugin/build.pl Build file
    lib/TWiki/Plugins/FormQueryPlugin/ColourMap.pm Highlight map class
    lib/TWiki/Plugins/FormQueryPlugin/TableFormat.pm Table formatter
    lib/TWiki/Plugins/FormQueryPlugin/TableDef.pm Table format definition class
    lib/TWiki/Plugins/FormQueryPlugin/Relation.pm Topic relation class
    lib/TWiki/Plugins/FormQueryPlugin/ReqDBSupport.pm Extra features
    lib/TWiki/Plugins/FormQueryPlugin/WebDB.pm Subclass of Map for a whole web
    lib/TWiki/Plugins/FormQueryPlugin/test.zip Test::Unit tests
    data/TWiki/FormQueryPlugin.txt Plugin topic
    bin/autocreate Topic creation script
    bin/tasknotify Mailer script
    FormQueryPlugin_installer.pl Install script

  • Unzip FormQueryPlugin.zip in your twiki installation directory.
  • Optionally, run FormQueryPlugin_installer to automatically check and install other TWiki modules that this module depends on. You can also do this step manually.
  • Alternatively, manually make sure the dependencies listed in the table below are resolved.
    NameVersionDescription
    TWiki::Contrib::Attrs>=1.000Required. Download and install from the TWiki:Plugins/AttrsContrib code library.
    TWiki::Contrib::DBCache>=1.001Required. Download and install from the TWiki:Plugins/DBCacheContrib code library.
    Time::ParseDate>=2003.0211Required. Available from CPAN.
    Storable>=2.072.13 recommended; accelerates cache handling. Available from CPAN
    TWiki::Plugins::MacrosPlugin>=1.000Recommended; used for parameterised includes. Download from TWiki:Plugins/MacrosPlugin repository.
  • The variable %FORMQUERYPLUGIN_ENABLE% must be set either globally or in the web where you want to use it.
    • Set ENABLE = 1
  • By default the plugin is enabled globally (on all webs). This may have an unwelcome performance impact, as the plugin may create a cache of topics in a web where it is not intended to be used. To enable the plugin for selected webs only, comment out the previous line (put a # in front of the word 'Set') and put the following line (without the #) into the WebPreferences topic of the web you want to enable it on:
    • #Set FORMQUERYPLUGIN_ENABLE = 1
  • Note: If you are using it, TWiki:Plugins/MacrosPlugin must appear in the Plugins evaluation order before FormQueryPlugin. You can ensure this by putting MacrosPlugin immediately after DefaultPlugin in the INSTALLEDPLUGINS list in TWikiPreferences.


Plugin Info

Plugin Author: TWiki:Main/CrawfordCurrie
Plugin Version: 1.3
Change History: 16 Jul 2004: Split into sub-components
  02 Apr 2004: SimonHardyFrancis? bugfixes incorporated. TimSlidel? patches incoporated for mod_perl, autocreate, and collapsing same-type tables in a single topic
  05 Feb 2004: Bugfix version
  11 Jul 2003: Initial version
Dependencies:
NameVersionDescription
TWiki::Contrib::Attrs>=1.000Required. Download and install from the TWiki:Plugins/AttrsContrib code library.
TWiki::Contrib::DBCache>=1.001Required. Download and install from the TWiki:Plugins/DBCacheContrib code library.
Time::ParseDate>=2003.0211Required. Available from CPAN.
Storable>=2.072.13 recommended; accelerates cache handling. Available from CPAN
TWiki::Plugins::MacrosPlugin>=1.000Recommended; used for parameterised includes. Download from TWiki:Plugins/MacrosPlugin repository.
Perl Version: 5.0
Plugin Home: http://TWiki.org/cgi-bin/view/Plugins/FormQueryPlugin
Feedback: http://TWiki.org/cgi-bin/view/Plugins/FormQueryPluginDev
Demo URL: http://www.owiki.org/FQP/

Copyright

This code is based on an original development of Motorola Inc. and is protected by the following copyrights:

  • Copyright © 2002-2003 Motorola. All Rights Reserved.
  • Copyright © 2004. Crawford Currie http://www.c-dot.co.uk

Extending or customising

Extension or customisation is welcome, as long as all extensions are described and code provided back to the author.

The module is shipped with a perl build file, which should be used for installation and testing. Testing is done using Test::Unit, and is invoked using the 'test' build target. Writing tests is a useful way of feeding back bugs as well. I can't encourage you enough to maintain and extend the tests!

License

As required for the publication of all extensions to TWiki, this software is published under the terms of the GNU General Public License.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details, published at http://www.gnu.org/copyleft/gpl.html

-- TWiki:Main/CrawfordCurrie - 17:22:35 06 September 2004

TWiki > FormQueryPlugin
Copyright © 1997-2024 California Institute of Technology.