Phase 0 simulations, Mach 1.92

Back to Phase 0

Using the same geometry as the Mach 1.5 case (upper plate at 14.06 degrees and lower plate angle of 9.994 degrees) with an unshocked gas pressure of 102 Torr and assumed room temp of 296 K, simulations were done with a Mach 1.92 shock.

This contour plot of the desinty at Time t =0.00042secs clearly shows the asymmetry of the shock structure as the shock travels down the converging wedge
time t =0.00042secs This asymmetry can further be seen by examining the pressure at the shock as measured along either the top or bottom wedge plate as a function of shock location. The shock pressure along the horizontal extending from the apex is also shown. Pressure trace


-- DavidHill - 08 Oct 2005

Copyright © 1997-2024 California Institute of Technology.