Start of topic | Skip to actions

We use the exact solution of a stationary rotating vortex for 2D Euler equations as initial conditions and to quantify the error in the density in the L1 norm. This specific exact solution is available under VortexRotationExactSolution. The computational codes are available here: [Clawpack], [WENO], [RIM]

For the following tests we use the computational domain [0,1]x[0.1] and the parameters

which results in a full rotation of particles positioned at
The computational costs for *each* time step are also measured (test run on a Pentium-4-2.6 GHz CPU).

- The truly mulit-dimensioanl Wave Propagation Method and dimensional splitting are the schemes inside Clawpack. They are stable up to CFL=1 and for these methods time step adjustment for CFL=0.9 was used.
- Wave Propagation: Method(2)=4, Method(3)=2. Godunov-Splitting: Method(2)=4, Method(3)=-2.
- The Riemann Invariant Manifold (RIM) Method is implemented in the RIM solver. The current implmentation is stable only up to CFL=0.5 and time step adjustment for CFL=0.45 was used.

N | Wave Propagation, Roe solver | Godunov-Splitting, Roe solver | Godunov-Splitting, Steger-Warming | Riemann Invariant Manifold | ||||||||

Error | Order | Cost | Error | Order | Cost | Error | Order | Cost | Error | Order | Cost | |

20 | 0.0111235 | 0.0028 | 0.0182218 | 0.0029 | 0.0165902 | 0.0028 | 0.0256279 | 0.0028 | ||||

40 | 0.0037996 | 1.55 | 0.0091 | 0.0090662 | 1.01 | 0.0086 | 0.0119211 | 0.48 | 0.0067 | 0.0139879 | 0.87 | 0.0107 |

80 | 0.0013388 | 1.50 | 0.0426 | 0.0046392 | 0.97 | 0.0434 | 0.0058922 | 1.02 | 0.0353 | 0.0073075 | 0.94 | 0.0465 |

160 | 0.0005005 | 1.42 | 0.1757 | 0.0023142 | 1.00 | 0.1589 | 0.0029312 | 1.01 | 0.1145 | 0.0037130 | 0.97 | 0.2145 |

- One step of RIM is slightly more expensive than with Clawpack. Both implementation are in Fortran 77.
- The current implementation of RIM is less accurate and efficient than standard schemes. The implementation is provided for comparisons, but the approach is currently not developed further.

- WENO and TCD are the essential two schemes inside the WENO-TCD solver. For both methods a time step adjustment for CFL=0.6 was used.
- WENO-5 Pt: Span=3, Stencil=5, Method=0. WENO-7 Pt: Span=5, Stencil=7, Method=0. TCD with Method=1 instead.

N | WENO - 5 Point | WENO - 7 Point | TCD - 5 Point | ||||||

Error | Order | Cost | Error | Order | Cost | Error | Order | Cost | |

20 | 0.0184102 | 0.0228 | 0.0082823 | 0.0316 | 0.0086420 | 0.0004 | |||

40 | 0.0069655 | 1.40 | 0.0875 | 0.0020886 | 1.99 | 0.1430 | 0.0044230 | 0.97 | 0.0200 |

80 | 0.0024369 | 1.52 | 0.4792 | 0.0006971 | 1.58 | 0.6998 | 0.0027805 | 0.67 | 0.1131 |

160 | 1.7320 | 2.3133 | 0.0008734 | 1.67 | 0.3870 |

- WENO is a relatively inefficient as it uses a multi-stage Runge-Kutta for the temporal integration.
- Our implementation uses a vector of state twice as long as required for standard 2D Euler equations and is in Fortran 90.
- A calculation with full Wave-Propagation method at doubled resolution is more accurate and still about 3x faster than with WENO 7-Pt.
- The single components in the WENO-TCD solver can be used for valuable comparisons alone, but for efficiency the dynamic transition from WENO to TCD should always be activated. See WenoHome for details.
- Note that the scheme has been developed for LES simulations for 3D Euler equations. For all other problems the Clawpack-based solvers are currently recommended.

-- RalfDeiterding - 23 Feb 2005

Copyright © 1997-2024 California Institute of Technology.