Skip to topic | Skip to bottom
Home

Start of topic | Skip to actions

Numerical Simulations of Gaseous Detonations

Detonations with One-Step Chemistry

Three-dimensional Simulation

The following graphs display schlieren plots (cf. Fig. 2.2) for a regularly oscillating three-dimensional configuration with

 \gamma=1.2,\; E_0=10,\; Q_0=50,\; f=1.2\;.

The initial conditions are analogous to the two-dimensional configurations of the previous section. The detonation channel has the rectangular cross section 10x10. Godunov-splitting is used for the incorporation of the source term and for the dimensional extension of a hybrid Roe-HLL scheme with MUSCL reconstruction. Automatic time step adjustment for CCFL = 0.95, Van Albada-limiter, 32 Pts/L1/2. Dynamic adaptive mesh refinement with AMROC with two additional refinement levels (refinement factors 2,3) was used. The computational time was 1530 h CPU time on Athlon 1.4GHz.

img43.gif

Detonation structure plotted on refinement grids.

znd3dsketch.gif

Figure 2.2: Location and orientation of the two-dimensional roll-ups.



Subsections



-- RalfDeiterding - 18 Dec 2004


You are here: Amroc > ClawpackHome > NumSimGasDet > OneStepThreeDSim

to top

Copyright © 1997-2024 California Institute of Technology.