Optimization


Functions
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS>
void	geom::geometricOptimizeInterior (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, int numSweeps=1)
	Optimize the position of the interior vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter>
void	geom::geometricOptimizeInterior (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, int numSweeps=1)
	Make `numSweeps` optimization sweeps over the given interior vertices with the quality function given as a template parameter.
template<int N, bool A, typename T, typename V, typename IS>
void	geom::geometricOptimizeInteriorUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, const int numSweeps=1)
	Optimize the position of the interior vertices.
template<int N, bool A, typename T, typename V, typename IS>
void	geom::geometricOptimizeInteriorUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, const int numSweeps=1)
	Optimize the position of the interior vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, int SD>
void	geom::geometricOptimizeBoundary (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, PointsOnManifold< N, N-1, SD, T > boundaryManifold, int numSweeps=1)
	Optimize the position of all boundary vertices.
template<template< int, typename > class QF, bool A, typename T, typename V, typename IS, typename IntForIter, int SD>
void	geom::geometricOptimizeBoundary (IndSimpSetIncAdj< 2, 2, A, T, V, IS > mesh, IntForIter begin, IntForIter end, PointsOnManifold< 2, 1, SD, T > boundaryManifold, int numSweeps=1)
	Make `numSweeps` optimization sweeps over the given boundary vertices with the quality function given as a template parameter.
template<int N, bool A, typename T, typename V, typename IS, int SD>
void	geom::geometricOptimizeBoundaryUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, PointsOnManifold< N, N-1, SD, T > boundaryManifold, const int numSweeps=1)
	Optimize the position of all boundary vertices.
template<int N, bool A, typename T, typename V, typename IS, int SD>
void	geom::geometricOptimizeBoundaryUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, PointsOnManifold< N, N-1, SD, T > boundaryManifold, const int numSweeps=1)
	Optimize the position of all boundary vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, int SD>
void	geom::geometricOptimize (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, PointsOnManifold< N, N-1, SD, T > boundaryManifold, int numSweeps=1)
	Optimize the position of all vertices.
template<int N, bool A, typename T, typename V, typename IS, int SD>
void	geom::geometricOptimizeUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, PointsOnManifold< N, N-1, SD, T > boundaryManifold, const int numSweeps=1)
	Optimize the position of all vertices.
template<int N, bool A, typename T, typename V, typename IS, int SD>
void	geom::geometricOptimizeUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, PointsOnManifold< N, N-1, SD, T > boundaryManifold, const int numSweeps=1)
	Optimize the position of all vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, int SD>
void	geom::geometricOptimizeWithBoundaryCondition (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, PointsOnManifold< N, N-1, SD, T > boundaryManifold, int numSweeps=1)
	Optimize the position of all vertices.
template<int N, bool A, typename T, typename V, typename IS, int SD>
void	geom::geometricOptimizeWithBoundaryConditionUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, PointsOnManifold< N, N-1, SD, T > boundaryManifold, const int numSweeps=1)
	Optimize the position of all vertices.
template<int N, bool A, typename T, typename V, typename IS, int SD>
void	geom::geometricOptimizeWithBoundaryConditionUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, PointsOnManifold< N, N-1, SD, T > boundaryManifold, const int numSweeps=1)
	Optimize the position of all vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, class BoundaryCondition>
void	geom::geometricOptimizeWithCondition (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, const BoundaryCondition &condition, int numSweeps=1)
	Optimize the position of all vertices.
template<int N, bool A, typename T, typename V, typename IS, class BoundaryCondition>
void	geom::geometricOptimizeWithConditionUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, const BoundaryCondition &condition, const int numSweeps=1)
	Optimize the position of all vertices.
template<int N, bool A, typename T, typename V, typename IS, class BoundaryCondition>
void	geom::geometricOptimizeWithConditionUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, const BoundaryCondition &condition, const int numSweeps=1)
	Optimize the position of all vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS>
void	geom::geometricOptimize (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, const int numSweeps=1)
	Optimize the position of all vertices.
template<int N, bool A, typename T, typename V, typename IS>
void	geom::geometricOptimizeUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, const int numSweeps=1)
	Optimize the position of all vertices.
template<int N, bool A, typename T, typename V, typename IS>
void	geom::geometricOptimizeUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, const int numSweeps=1)
	Optimize the position of all vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter, int SD>
void	geom::geometricOptimizeWithBoundaryCondition (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, IntForIter begin, IntForIter end, PointsOnManifold< N, N-1, SD, T > boundaryManifold, int numSweeps=1)
	Make `numSweeps` optimization sweeps over the given vertices with the quality function given as a template parameter.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, int SD>
void	geom::geometricOptimizeWithBoundaryConditionUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, IntForIter begin, IntForIter end, PointsOnManifold< N, N-1, SD, T > boundaryManifold, const int numSweeps=1)
	Optimize the position of a set of vertices.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, int SD>
void	geom::geometricOptimizeWithBoundaryConditionUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > mesh, IntForIter begin, IntForIter end, PointsOnManifold< N, N-1, SD, T > boundaryManifold, const int numSweeps=1)
	Optimize the position of a set of vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>
void	geom::geometricOptimizeWithCondition (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const BoundaryCondition &condition, int numSweeps=1)
	Make `numSweeps` optimization sweeps over the given vertices with the quality function given as a template parameter.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>
void	geom::geometricOptimizeWithConditionUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const BoundaryCondition &condition, int numSweeps=1)
	Optimize the position of a set of vertices.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>
void	geom::geometricOptimizeWithConditionUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const BoundaryCondition &condition, const int numSweeps=1)
	Optimize the position of a set of vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter>
void	geom::geometricOptimize (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const int numSweeps=1)
	Make `numSweeps` optimization sweeps over the given vertices with the quality function given as a template parameter.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter>
void	geom::geometricOptimizeUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const int numSweeps=1)
	Optimize the position of a set of vertices.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter>
void	geom::geometricOptimizeUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const int numSweeps=1)
	Optimize the position of a set of vertices.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>
void	geom::geometricOptimizeWithConditionConstrained (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const BoundaryCondition &condition, const T maxConstraintError, int numSweeps=1)
	Make `numSweeps` constrained optimization sweeps over the given vertices with the quality function given as a template parameter.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>
void	geom::geometricOptimizeWithConditionConstrainedUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const BoundaryCondition &condition, const T maxConstraintError, int numSweeps=1)
	Optimize the position of a set of vertices subject to a constant content constraint.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>
void	geom::geometricOptimizeWithConditionConstrainedUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const BoundaryCondition &condition, const T maxConstraintError, const int numSweeps=1)
	Optimize the position of a set of vertices subject to a constant content constraint.
template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter>
void	geom::geometricOptimizeConstrained (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const T maxConstraintError, const int numSweeps=1)
	Make `numSweeps` constrained optimization sweeps over the given vertices with the quality function given as a template parameter.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter>
void	geom::geometricOptimizeConstrainedUsingMeanRatio (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const T maxConstraintError, const int numSweeps=1)
	Optimize the position of a set of vertices subject to a constant content constraint.
template<int N, bool A, typename T, typename V, typename IS, typename IntForIter>
void	geom::geometricOptimizeConstrainedUsingConditionNumber (IndSimpSetIncAdj< N, N, A, T, V, IS > *mesh, IntForIter begin, IntForIter end, const T maxConstraintError, const int numSweeps=1)
	Optimize the position of a set of vertices subject to a constant content constraint.

Detailed Description

These functions perform geometric optimization of vertex positions. One can sweep over all vertices or a set of vertices. One can apply either unconstrained optimization or optimization subject to a constant content constraint.

Function Documentation

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter>

void geom::geometricOptimize	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const int	numSweeps = `1`
	)

Make numSweeps optimization sweeps over the given vertices with the quality function given as a template parameter.

QF is a simplex quality functor. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS>

void geom::geometricOptimize	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the specified quality function.

Parameters:

	mesh	is the indexed simplex set.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, int SD>

void geom::geometricOptimize	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		int	numSweeps = `1`
	)

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the boundary vertices with the specified quality function.

Parameters:

	mesh	is the indexed simplex set.
	boundaryManifold	is the boundary manifold. If specified (nonzero), the boundary vertices will be optimized. If not, they will not be altered.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, bool A, typename T, typename V, typename IS, typename IntForIter, int SD>

void geom::geometricOptimizeBoundary	(	IndSimpSetIncAdj< 2, 2, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		PointsOnManifold< 2, 1, SD, T > *	boundaryManifold,
		int	numSweeps = `1`
	)

Make numSweeps optimization sweeps over the given boundary vertices with the quality function given as a template parameter.

QF is a simplex quality functor. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	boundaryManifold	is the boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, int SD>

void geom::geometricOptimizeBoundary	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		int	numSweeps = `1`
	)

Optimize the position of all boundary vertices.

Make numSweeps optimization sweeps over the boundary vertices with the specified quality function.

Parameters:

	mesh	is the indexed simplex set.
	boundaryManifold	is the boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, int SD>

void geom::geometricOptimizeBoundaryUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		const int	numSweeps = `1`
	)

Optimize the position of all boundary vertices.

Make numSweeps optimization sweeps over the vertices with the modified condition number quality function.

Parameters:

	mesh	is the indexed simplex set.
	boundaryManifold	is the boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, int SD>

void geom::geometricOptimizeBoundaryUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		const int	numSweeps = `1`
	)

Optimize the position of all boundary vertices.

Make numSweeps optimization sweeps over the vertices with the modified mean ratio quality function.

Parameters:

	mesh	is the indexed simplex set.
	boundaryManifold	is the boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter>

void geom::geometricOptimizeConstrained	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const T	maxConstraintError,
		const int	numSweeps = `1`
	)			`[inline]`

Make numSweeps constrained optimization sweeps over the given vertices with the quality function given as a template parameter.

QF is a simplex quality functor. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	maxConstraintError	is the maximum allowed constraint error.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter>

void geom::geometricOptimizeConstrainedUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const T	maxConstraintError,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices subject to a constant content constraint.

Make numSweeps optimization sweeps over the given vertices with the modified condition number quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	maxConstraintError	is the maximum allowed constraint error.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter>

void geom::geometricOptimizeConstrainedUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const T	maxConstraintError,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices subject to a constant content constraint.

Make numSweeps optimization sweeps over the given vertices with the modified mean ratio quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	maxConstraintError	is the maximum allowed constraint error.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter>

void geom::geometricOptimizeInterior	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		int	numSweeps = `1`
	)

Make numSweeps optimization sweeps over the given interior vertices with the quality function given as a template parameter.

QF is a simplex quality functor. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS>

void geom::geometricOptimizeInterior	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		int	numSweeps = `1`
	)

Optimize the position of the interior vertices.

Make numSweeps optimization sweeps over the interior vertices with the specified quality function.

Parameters:

	mesh	is the indexed simplex set.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS>

void geom::geometricOptimizeInteriorUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		const int	numSweeps = `1`
	)

Optimize the position of the interior vertices.

Make numSweeps optimization sweeps over the interior vertices with the modified condition number quality function.

Parameters:

	mesh	is the indexed simplex set.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS>

void geom::geometricOptimizeInteriorUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		const int	numSweeps = `1`
	)

Optimize the position of the interior vertices.

Make numSweeps optimization sweeps over the interior vertices with the modified mean ratio quality function.

Parameters:

	mesh	is the indexed simplex set.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter>

void geom::geometricOptimizeUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices.

Make numSweeps optimization sweeps over the given vertices with the modified condition number quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS>

void geom::geometricOptimizeUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the modified condition number quality function.

Parameters:

	mesh	is the indexed simplex set.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, int SD>

void geom::geometricOptimizeUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		const int	numSweeps = `1`
	)

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the modified condition number quality function.

Parameters:

	mesh	is the indexed simplex set.
	boundaryManifold	is the boundary manifold. If specified (nonzero), the boundary vertices will be optimized. If not, they will not be altered.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter>

void geom::geometricOptimizeUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices.

Make numSweeps optimization sweeps over the given vertices with the modified mean ratio quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS>

void geom::geometricOptimizeUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the modified mean ratio quality function.

Parameters:

	mesh	is the indexed simplex set.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, int SD>

void geom::geometricOptimizeUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		const int	numSweeps = `1`
	)

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the modified mean ratio quality function.

Parameters:

	mesh	is the indexed simplex set.
	boundaryManifold	is the boundary manifold. If specified (nonzero), the boundary vertices will be optimized. If not, they will not be altered.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter, int SD>

void geom::geometricOptimizeWithBoundaryCondition	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		int	numSweeps = `1`
	)

Make numSweeps optimization sweeps over the given vertices with the quality function given as a template parameter.

QF is a simplex quality functor. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	boundaryManifold	is the boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, int SD>

void geom::geometricOptimizeWithBoundaryCondition	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		int	numSweeps = `1`
	)

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the specified quality function.

Parameters:

	mesh	is the indexed simplex set.
	boundaryManifold	is the boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, int SD>

void geom::geometricOptimizeWithBoundaryConditionUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices.

Make numSweeps optimization sweeps over the given vertices with the modified mean ratio quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	boundaryManifold	The boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, int SD>

void geom::geometricOptimizeWithBoundaryConditionUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		const int	numSweeps = `1`
	)

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the modified condition number quality function.

Parameters:

	mesh	is the indexed simplex set.
	boundaryManifold	is the boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, int SD>

void geom::geometricOptimizeWithBoundaryConditionUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices.

Make numSweeps optimization sweeps over the given vertices with the modified mean ratio quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	boundaryManifold	The boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, int SD>

void geom::geometricOptimizeWithBoundaryConditionUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		PointsOnManifold< N, N-1, SD, T > *	boundaryManifold,
		const int	numSweeps = `1`
	)

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the modified mean ratio quality function.

Parameters:

	mesh	is the indexed simplex set.
	boundaryManifold	is the boundary manifold.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>

void geom::geometricOptimizeWithCondition	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const BoundaryCondition &	condition,
		int	numSweeps = `1`
	)

Make numSweeps optimization sweeps over the given vertices with the quality function given as a template parameter.

QF is a simplex quality functor. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	condition	is a transformation that is applied after the optimization.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, class BoundaryCondition>

void geom::geometricOptimizeWithCondition	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		const BoundaryCondition &	condition,
		int	numSweeps = `1`
	)

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the specified quality function.

Parameters:

	mesh	is the indexed simplex set.
	condition	is a transformation that is applied after the optimization.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<template< int, typename > class QF, int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>

void geom::geometricOptimizeWithConditionConstrained	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const BoundaryCondition &	condition,
		const T	maxConstraintError,
		int	numSweeps = `1`
	)

Make numSweeps constrained optimization sweeps over the given vertices with the quality function given as a template parameter.

QF is a simplex quality functor. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	condition	is a transformation that is applied after the optimization.
	maxConstraintError	is the maximum allowed constraint error.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>

void geom::geometricOptimizeWithConditionConstrainedUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const BoundaryCondition &	condition,
		const T	maxConstraintError,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices subject to a constant content constraint.

Make numSweeps optimization sweeps over the given vertices with the modified condition number quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	condition	is a transformation that is applied after the optimization.
	maxConstraintError	is the maximum allowed constraint error.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>

void geom::geometricOptimizeWithConditionConstrainedUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const BoundaryCondition &	condition,
		const T	maxConstraintError,
		int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices subject to a constant content constraint.

Make numSweeps optimization sweeps over the given vertices with the modified mean ratio quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	condition	is a transformation that is applied after the optimization.
	maxConstraintError	is the maximum allowed constraint error.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>

void geom::geometricOptimizeWithConditionUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const BoundaryCondition &	condition,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices.

Make numSweeps optimization sweeps over the given vertices with the modified condition number quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	condition	is a transformation that is applied after the optimization.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, class BoundaryCondition>

void geom::geometricOptimizeWithConditionUsingConditionNumber	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		const BoundaryCondition &	condition,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the modified condition number quality function.

Parameters:

	mesh	is the indexed simplex set.
	condition	is a transformation that is applied after the optimization.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, typename IntForIter, class BoundaryCondition>

void geom::geometricOptimizeWithConditionUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		IntForIter	begin,
		IntForIter	end,
		const BoundaryCondition &	condition,
		int	numSweeps = `1`
	)			`[inline]`

Optimize the position of a set of vertices.

Make numSweeps optimization sweeps over the given vertices with the modified mean ratio quality function. IntForIter is a const iterator on vertex indices.

Parameters:

	mesh	is the indexed simplex set.
	begin	is the beginning of the vertex indices.
	end	is the end of the vertex indices.
	condition	is a transformation that is applied after the optimization.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

template<int N, bool A, typename T, typename V, typename IS, class BoundaryCondition>

void geom::geometricOptimizeWithConditionUsingMeanRatio	(	IndSimpSetIncAdj< N, N, A, T, V, IS > *	mesh,
		const BoundaryCondition &	condition,
		const int	numSweeps = `1`
	)			`[inline]`

Optimize the position of all vertices.

Make numSweeps optimization sweeps over the vertices with the modified mean ratio quality function.

Parameters:

	mesh	is the indexed simplex set.
	condition	is a transformation that is applied after the optimization.
	numSweeps	is the number of sweeps performed over the vertices. By default it is 1.

Generated on Fri Aug 24 12:56:00 2007 for Computational Geometry Package by

1.4.7

Optimization

Functions

Detailed Description

Function Documentation